TWOODS Line

the laying portal

The laying portaltakes boards of different lengths from different boxes and places them in the desired direction on the production table. The specifications for these laying patterns come directly from the programming system. Recesses such as windows and doors are recognized and not laid out, which reduces the sections to a minimum.

The element leaves this portal as a loose stack of boards. The board layers laid on the TW-Layerlaying portal are pushed to the TW-Fix dowel portal.

the drilling and dowel portal

At thedowel portal, the boards are clamped and holes are drilled through all layers. Two drilling units with 15 mm auger bits create through or non-through holes. If the elements are not drilled through, the dowels are not visible on one side. The dowel is removed from the magazine, compressed and moistened by means of a spray device before being inserted.

All of this happens under pressure, so it is not possible for the boards to shift. Not a single drop of glue is required in the entire process. A finished element therefore consists of100%natural raw materials.

the portal robot

In the third portal, the solid wood elements are given their individual shape. The fully automatic portal mills the contours, drills the sockets, routes the connecting grooves, and calibrates the elements to the required thickness. Das Fräs- und Spindelaggregat wird fünfachsig im Raum bewegt.

With the modular timber beam systemTW-Mill, wooden board materials, glued laminated timber, or individual beams can be processed efficiently, flexibly and precisely. Length of the system, passage width, passage height, arrangement and number of spindles and units and many other features can be freely selected.